TSI Portacount PRO 8030 Respirator Fit Tester
Coronavirus / COVID-19 FEATURED ITEM!
The PORTACOUNT ® PRO Respirator Fit Tester is the easy way to reliably fit test any tight-fitting respirators.
The PORTACOUNT PRO Respirator Fit Tester 8030 eliminates the guesswork associated with tedious and error-prone qualitative fit test methods. No other respirator fit tester can quantitatively fit test so many types of respirators - gas masks, SCBAs, respirators, even disposables. If the mask requires fit testing, count on the PORTACOUNT PRO fit tester to provide the fastest and easiest OSHA-compliant fit test method.
Features:
Simple and easy to use
Stand alone operation - quicker setup and easier operation
Optional mask sampling adapters allow fit testing with employee's own mask
Color touch screen lets you operate the instrument with a touch of your finger a pen or stylus
Automates fit testing with FITPRO Fit Test Software
OSHA-compliant for all respirators except N95 (Easy upgrade to Model 8038 with built-in N95 technology)
Use with external computer to generate reports and print fit test cards
Measures fit factors greater than 10000
Computes respirator fit factor using microscopic particles in ambient air
Applications:
Quantitative respirator fit testing (QNFT)
Disposable filtering-facepiece fit testing for Series 100/99/P3/HEPA masks
Half mask fit testing
Full-face mask fit testing
Gas mask fit testing
PAPR mask fit testing
SCBA mask fit testing
Alcohol Type | 99.5%+ reagent grade isopropyl |
Alcohol - Hours Per Charge | 6 hours at 21°C (70°F) |
Temperature Range - Storage | -40 to 70°C (-40 to 160°F) |
Temperature Range - Operation | 0 to 38°C (32 to 100°F) |
Flow Rate - Sample | 350 cm3/min |
Flow Rate - Total | 1000 cm3/min (nominal) |
Power | Autosensing 100 to 250 VAC 50 to 60 Hz |
Fit Factor Measurement | Direct measurement of fit factor (Cout/Cin)** |
Respirator Facepieces that can be Fit Tested | Full-face elastomeric, Half-face elastomeric, EN series P3 filtering-facepiece, EN series P2 filtering-facepiece*, EN series P1 filtering-facepi |
Typical Fit Factor Accuracy | ±10% of reading |
Fit Factor Range | 1 to greater than 10000 |